Topaz 8 Plus Low Air Loss Mattress

The Topaz 8 Plus is ideal for individuals living in the community with Stage I – III pressure wounds or as a preventative measure. It requires minimal maintenance or adjustments. The maximum weight capacity is 350 lbs.

The design of the individual cells inside the mattress are similar to a figure 8, divided into two 4″ sections.  The lower four inches remain inflated at all times. The top four inches alternate in a 3:1 pattern so that 66% of the body is constantly supported. This allows for a more stable surface.

To ensure the longevity of the control unit we recommend inspecting / cleaning the filter monthly.

Micro Low Air Loss Technology - Air escapes from laser-cut openings located under air cells and is distributed equally under a vapour-permeable cover that acts to wick moisture away from the skin.

3:1 Alternation Therapy - 18 independent 8 inch high cells inflate and deflate in a 3:1 cycle, creating maximum support for the individual using 2/3 of the air cells. NEW! – When CLP mode is selected, mattress maintains function at a reduced selected pressure (Constant Low Pressure) in static mode. Cells have a figure “8” design; the bottom half is always inflated and only the top half alternates. In the event of a power failure the bottom half of the cells remain inflated up to 72 hours.

Comfort Level and Auto Detection - 8 soft/firm settings offer easy comfort adjustment allowing caregivers to fine-tune therapeutic support and optimize patient comfort. Auto Detection can be used to automatically detect weight of the individual and set appropriate pressure for patient comfort.

Auto Firm - Inflates the mattress with a simple push of a button for set-up and/or nursing care requirements.

Auto Alarm - Visual and audio alarms in the event of power failure, low pressure and service indicator.

CPR Quick-Release Valve - Deflates the torso section in less than 20 seconds in the event of medical emergencies.